READER’S FORUM / 대한치과교정학회지

no abstract available

Clinical and Laboratory Factors Associated with Symptom Development in Asymptomatic COVID-19 Patients at the Time of Diagnosis

In preparation for the surge of coronavirus disease 2019 (COVID-19), it is crucial to allocate medical resources efficiently for distinguishing people who remain asymptomatic until the end of the disease. Between January 27, 2020, and April 21, 2020, 517 COVID-19 cases from 13 healthcare facilities in Gyeonggi province, Korea, were identified out of which the epidemiologic and clinical information of 66 asymptomatic patients at the time of diagnosis were analyzed retrospectively. An exposure-diagnosis interval within 7 days and abnormal aspartate aminotransferase levels were identified as characteristic symptom development in asymptomatic COVID-19 patients. If asymptomatic patients without these characteristics at the time of diagnosis could be differentiated early, more medical resources could be secured for mild or moderate cases in this COVID-19 surge.

Aberrant growth of the anterior cranial base relevant to severe midface hypoplasia of Apert syndrome / 대한악안면성형재건외과학회지

BACKGROUND: A 9-year-old male showed severe defects in midface structures, which resulted in maxillary hypoplasia, ocular hypertelorism, relative mandibular prognathism, and syndactyly. He had been diagnosed as having Apert syndrome and received a surgery of frontal calvaria distraction osteotomy to treat the steep forehead at 6 months old, and a surgery of digital separation to treat severe syndactyly of both hands at 6 years old. Nevertheless, he still showed a turribrachycephalic cranial profile with proptosis, a horizontal groove above supraorbital ridge, and a short nose with bulbous tip. METHODS: Fundamental aberrant growth may be associated with the cranial base structure in radiological observation. RESULTS: The Apert syndrome patient had a shorter and thinner nasal septum in panthomogram, PA view, and Waters’ view; shorter zygomatico-maxillary width (83.5 mm) in Waters’ view; shorter length between the sella and nasion (63.7 mm) on cephalogram; and bigger zygomatic axis angle of the cranial base (118.2°) in basal cranial view than a normal 9-year-old male (94.8 mm, 72.5 mm, 98.1°, respectively). On the other hand, the Apert syndrome patient showed interdigitating calcification of coronal suture similar to that of a normal 30-year-old male in a skull PA view. CONCLUSION: Taken together, the Apert syndrome patient, 9 years old, showed retarded growth of the anterior cranial base affecting severe midface hypoplasia, which resulted in a hypoplastic nasal septum axis, retruded zygomatic axes, and retarded growth of the maxilla and palate even after frontal calvaria distraction osteotomy 8 years ago. Therefore, it was suggested that the severe midface hypoplasia and dysostotic facial profile of the present Apert syndrome case are closely relevant to the aberrant growth of the anterior cranial base supporting the whole oro-facial and forebrain development.

Reader's Forum / 대한치과교정학회지

No abstract available.

The genial tubercle: A prospective novel landmark for the diagnosis of mandibular asymmetry / 대한치과교정학회지

INTRODUCTION: Identifying menton (Me) on posteroanterior cephalograms and three-dimensional (3D) cone-beam computed tomography (CBCT) images is difficult, because the midpoint of the symphyseal area is not identifiable after the mandibular symphysis fuses at an early age. The aim of this study was to evaluate the reliability of the identification of the genial tubercle (GT) in patients with mandibular asymmetry and to compare it with that of the traditional landmark, Me. METHODS: The samples comprised 20 CBCT images of adults with mandibular asymmetry. Two examiners performed the identifications and measurements. Me and GT were marked, and the anteroposterior, vertical, and transverse distances to the three reference planes were measured on 3D-reconstructed CBCT images. The intra- and inter-examiner reliability of landmark identification of Me and GT were assessed using the intraclass correlation coefficient (ICC) and Bland-Altman plots. RESULTS: The Me and GT landmarks showed excellent reliability (ICC ≥ 0.993) three-dimensionally. In the transverse evaluation, the ICC values of the GT (range, 0.997–0.999) tended to be slightly higher than those of Me (range, 0.993–0.996). In the Bland-Altman plots for the two separate assessments, Me showed a maximum error of 1.76 mm in the transverse direction, whereas the GT showed a maximum error of 0.96 mm in the 95% limit. CONCLUSIONS: Our results suggest that both Me and GT are clinically reliable and equally useful landmarks for the evaluation of mandibular asymmetry on CBCT images.

Reader’s Forum / 대한치과교정학회지

No abstract available.

Alterations of papilla dimensions after orthodontic closure of the maxillary midline diastema: a retrospective longitudinal study

PURPOSE: The aim of this study was to evaluate alterations of papilla dimensions after orthodontic closure of the diastema between maxillary central incisors. METHODS: Sixty patients who had a visible diastema between maxillary central incisors that had been closed by orthodontic approximation were selected for this study. Various papilla dimensions were assessed on clinical photographs and study models before the orthodontic treatment and at the follow-up examination after closure of the diastema. Influences of the variables assessed before orthodontic treatment on the alterations of papilla height (PH) and papilla base thickness (PBT) were evaluated by univariate regression analysis. To analyze potential influences of the 3-dimensional papilla dimensions before orthodontic treatment on the alterations of PH and PBT, a multiple regression model was formulated including the 3-dimensional papilla dimensions as predictor variables. RESULTS: On average, PH decreased by 0.80 mm and PBT increased after orthodontic closure of the diastema (P<0.01). Univariate regression analysis revealed that the PH (P=0.002) and PBT (P=0.047) before orthodontic treatment influenced the alteration of PH. With respect to the alteration of PBT, the diastema width (P=0.045) and PBT (P=0.000) were found to be influential factors. PBT before the orthodontic treatment significantly influenced the alteration of PBT in the multiple regression model. CONCLUSIONS: PH decreased but PBT increased after orthodontic closure of the diastema. The papilla dimensions before orthodontic treatment influenced the alterations of PH and PBT after closure of the diastema. The PBT increased more when the diastema width before the orthodontic treatment was larger.

Enhanced compatibility and initial stability of Ti6Al4V alloy orthodontic miniscrews subjected to anodization, cyclic precalcification, and heat treatment / 대한치과교정학회지

OBJECTIVE: To evaluate the bioactivity, and the biomechanical and bone-regenerative properties of Ti6Al4V miniscrews subjected to anodization, cyclic precalcification, and heat treatment (APH treatment) and their potential clinical use. METHODS: The surfaces of Ti6Al4V alloys were modified by APH treatment. Bioactivity was assessed after immersion in simulated body fluid for 3 days. The hydrophilicity and the roughness of APH-treated surfaces were compared with those of untreated (UT) and anodized and heat-treated (AH) samples. For in vivo tests, 32 miniscrews (16 UT and 16 APH) were inserted into 16 Wistar rats, one UT and one APH-treated miniscrew in either tibia. The miniscrews were extracted after 3 and 6 weeks and their osseointegration (n = 8 for each time point and group) was investigated by surface and histological analyses and removal torque measurements. RESULTS: APH treatment formed a dense surface array of nanotubular TiO2 layer covered with a compact apatite-like film. APH-treated samples showed better bioactivity and biocompatibility compared with UT and AH samples. In vivo, APH-treated miniscrews showed higher removal torque and bone-to-implant contact than did UT miniscrews, after both 3 and 6 weeks (p < 0.05). Also, early deposition of densely mineralized bone around APH-treated miniscrews was observed, implying good bonding to the treated surface. CONCLUSIONS: APH treatment enhanced the bioactivity, and the biomechanical and bone regenerative properties of the Ti6Al4V alloy miniscrews. The enhanced initial stability afforded should be valuable in orthodontic applications.

A study on the prevalence of the idiopathic osteosclerosis in Korean malocclusion patients / 대한구강악안면방사선학회지

PURPOSE: This retrospective study was performed to investigate the prevalence of the idiopathic osteosclerosis (IO) in Korean malocclusion patients according to age, sex, and the Angle's classification of malocclusion. MATERIALS AND METHODS: This study consisted of 2,001 randomly selected patients from the Department of Orthodontics at the Gangneung-Wonju National University Dental Hospital, Korea. The prevalence of IO in Korean malocclusion patients was recorded using their panoramic radiographs, and the following parameters were surveyed; age, sex, and the Angle's classification of malocclusion. The chi-square test was analyzed to determine the statistical significance of differences in the prevalence of IO between age, sex, and the Angle's classification of malocclusion. RESULTS: The prevalence of IO in the jaws was 6.7% in a total of 2,001 examined orthodontic patients. The majority of IO was found in the mandible (96.58%). The 30-39 age group showed the highest prevalence of IO (9.60%). There was a higher prevalence in females (6.89%) than in males (6.45%). The prevalence of IO in Angle Class I group (7.07%) was the most frequent, followed by Angle Class II group (6.72%), and Angle Class III group (6.40%). However, there was no statistical significance in sex and Angle's classification of malocclusion. CONCLUSION: The prevalence of IO in malocclusion patients showed the differences between various age groups and most of them were found in the mandibular posterior area. However, sex and the type of malocclusion are not to be considered as a contributing factor of IO.

Depression and Its Infl uencing Factors among Korean Medical and Engineering Students in Urban Areas using Zung Self-Rating Depression Scale / 가정의학회지

BACKGROUND: It is a well known fact that students majoring in medicine and engineering suffer from higher stress level and depression than students in other majors. This study was done to assess the prevalence of depression and the infl uencing factors among the university students majoring in either medicine or engineering and to compare the depression prevalence between the two groups. METHODS: The study randomly selected 640 students either majoring in medicine or engineering from two universities in Kyung-Gi province, Korea. Each of 320 students majoring in either of the two majors from each university was recruited. Among 640 students, 360 students, who were composed of 172 medical students and 188 engineering students was finally chosen for the analysis. The Zung Self-Rating Depression Scale was used to measure the depression state. RESULTS: The average Zung depression score of university students was 49.2 alpha 9.8. Medical students had a higher score of 52.4 alpha 9.3 as compared to engineering students, who scored 46.3 +/- 9.4. Overall depression rate was 42.8%. Medical students had a higher depression rate (52.3%) than engineering students (34.0%). The logistic analysis showed that infl uencing factors on depression state were sex, grade, major, stress and satisfactory sleep. The main source of stress for medical students was the grades from classes whereas job search was for engineering students. There were differences between the two groups in managing the stress. Medical students chose alcohol drinking or smoking for stress management whereas engineering students playing selected video games as their outlet. CONCLUSION: Medical students from urban areas seemed to be depressed more than engineering students. Their stress management methods among the subjects were drinking, smoking, and playing video games which may cause further physical and psychological problems in the future.